|
Summa S3 Class T Series Vinyl Cutters
The superior new Summa S3 Class T Series
combines S3 Class power and precision with a state-of-the-art TrueTangential™
cutting head. The powerful
servomotors and Summa's MicroSprocket™ drive to let you cut
even the thickest, toughest media with amazing speed,
confidence, and precision. Summa's tracking is legendary in the
industry. You'll also get an unbelievable number of innovations
and built-in capabilities. Summa S3 Class challenges any other
vinyl cutter in its class, and comes out a winner. If you want
the best tangential cutter the industry has to offer, check out
the selection below. Then contact SignEquip now to order the
Summa S3 Class T Series cutter of your choice.
*Please Note: Due to the volatility of the Canadian Dollar,
prices are subject to change without notice. Please
contact us for your price quote.
Summa
S3-75 (30")
T Series™
$8797 CAD
|
Specifications |
Summa S3 75 (T
Series) |
|
TYPE |
75
cm (30 in.) tangential-knife, friction feed |
|
SPEED |
Up
to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
|
ACCELERATION |
Up
to 4 g axial;
Up to 5.5 g diagonal |
|
KNIFE PRESSURE |
0-600 grams, in 5-gram increments |
ADDRESSABLE
RESOLUTION |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
|
REPEATABILITY |
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40
ft.) long |
|
TOOL COMPATIBILITY |
Standard knife for vinyl, reflective and fluorescent
films;
Thick material knife for sandblast resist and other
films up to 1.2 mm (.047") thick;
Double-tip knife for heavy duty materials;
Ballpoint pen for plotting on paper;
Pounce tool for pouncing on paper |
|
MEDIA WIDTHS |
6 to
84 cm (2.4 to 33 in.) |
|
MEDIA LENGTH |
50 m
(164 ft.) maximum |
|
MEDIA THICKNESS |
Up
to 0.25 mm (0.01 in.) with standard knife;
Up to 1.2 mm (0.047 in.) with thick material knife
Up to 0.25 mm (0.01 in) reflective and other hard-to-cut
materials with double-tip knife |
|
CUTTING AREA |
74.2
cm x 50 m (29.2 in. x 164 ft.) maximum |
|
MEMORY |
16
MB |
|
INTERFACE |
Ethernet and USB |
|
DISPLAY LANGUAGES |
English; French; German; Dutch; Italian; Spanish; Polish |
|
CUTTER LANGUAGES |
Summa DM/PL, HP-GL or
HP-GL2 (with selectable origin ; HP7475 and HP
7580/7585) |
POWER
REQUIREMENTS |
100-240 Vac, 48-62 Hz, 85 VA maximum |
OPERATING
ENVIRONMENT |
15°
to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
|
DIMENSIONS |
(W x
D x H) 141 x 68 x 111 cm (55.5 x 26.8 x 43.7 in.) |
|
SHIPPING WEIGHT |
69
kg (152 Lbs.) |
ACCESSORIES
INCLUDED |
2
standard knife blades and standard nose piece
1 thick material knife and thick material nose piece
Blade holder for standard, thick material, and
double-tip knife (requires matching nose piece)
Ballpoint pen with pen holder
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian,
Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter
settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
|
contact
us...
Summa
S3-120 (48")
T Series™
$11,497 CAD
|
Specifications |
Summa S3 120 (T
Series) |
|
TYPE |
120
cm (48 in.) tangential-knife, friction feed |
|
SPEED |
Up
to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
|
ACCELERATION |
Up
to 4 g axial;
Up to 5.5 g diagonal |
|
KNIFE PRESSURE |
0-600 grams, in 5-gram increments |
ADDRESSABLE
RESOLUTION |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
|
REPEATABILITY |
Vinyl =/< 76 cm (30"):
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40
ft.) long;
Vinyl > 76 cm (30"):
Within +/- 0.1 mm (0.004 in.) on plots up to 4 m (13
ft.) long |
|
TOOL COMPATIBILITY |
Standard knife for vinyl, reflective and fluorescent
films;
Thick material knife for sandblast resist and other
films up to 1.2 mm (.047") thick;
Double-tip knife for heavy duty materials;
Ballpoint pen for plotting on paper;
Pounce tool for pouncing on paper |
|
MEDIA WIDTHS |
11.5
to 130 cm (4.5 to 51 in.) |
|
MEDIA LENGTH |
50 m
(164 ft.) maximum |
|
MEDIA THICKNESS |
Up
to 0.25 mm (0.01 in.) with standard knife;
Up to 1.2 mm (0.047 in.) with thick material knife
Up to 0.25 mm (0.01 in) reflective and other hard-to-cut
materials with double-tip knife |
|
CUTTING AREA |
120
cm x 50 m (47.2 in. x 164 ft.) maximum |
|
MEMORY |
16
MB |
|
INTERFACE |
Ethernet and USB |
|
DISPLAY LANGUAGES |
English; French; German; Dutch; Italian; Spanish; Polish |
|
CUTTER LANGUAGES |
Summa DM/PL, HP-GL or
HP-GL2 (with selectable origin ; HP7475 and HP
7580/7585) |
POWER
REQUIREMENTS |
100-240 Vac, 48-62 Hz, 85 VA maximum |
OPERATING
ENVIRONMENT |
15°
to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
|
DIMENSIONS |
(W x
D x H) 187 x 68 x 111 cm (73.6 x 26.8 x 43.7 in.) |
|
SHIPPING WEIGHT |
86
kg (190 Lbs.) |
ACCESSORIES
INCLUDED |
2
standard knife blades and standard nose piece
1 thick material knife and thick material nose piece
Blade holder for standard, thick material, and
double-tip knife (requires matching nose piece)
Ballpoint pen with pen holder
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian,
Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter
settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
|
contact
us...
Summa S3-140 (54")
T Series
$13,497 CAD
|
Specifications |
Summa S3 140 |
|
TYPE |
140
cm (54 in.) tangential-knife, friction feed |
|
SPEED |
Up
to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
|
ACCELERATION |
Up
to 4 g axial;
Up to 5.5 g diagonal |
|
KNIFE PRESSURE |
0-600 grams, in 5-gram increments |
ADDRESSABLE
RESOLUTION |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
|
REPEATABILITY |
Vinyl =/< 76 cm (30"):
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40
ft.) long;
Vinyl > 76 cm (30"):
Within +/- 0.1 mm (0.004 in.) on plots up to 4 m (13
ft.) long |
|
TOOL COMPATIBILITY |
Standard knife for vinyl, reflective and fluorescent
films;
Thick material knife for sandblast resist and other
thick films;
Pen for plotting on paper;
Pounce tool for pouncing on paper |
|
MEDIA WIDTHS |
17
to 145 cm (6.7 to 57 in.) |
|
MEDIA LENGTH |
50 m
(164 ft.) maximum |
|
MEDIA THICKNESS |
Up
to 0.25 mm (0.01 in.) with standard knife;
Up to 0.8 mm (0.03 in.) with thick material knife
|
|
MEMORY |
16
MB |
|
INTERFACE |
Ethernet and USB |
|
DISPLAY LANGUAGES |
English; French; German; Dutch; Italian; Spanish; Polish |
|
CUTTER LANGUAGES |
Summa DM/PL, HP-GL or
HP-GL2 (with selectable origin ; HP7475 and HP
7580/7585) |
POWER
REQUIREMENTS |
100-240 Vac, 48-62 Hz, 85 VA maximum |
OPERATING
ENVIRONMENT |
15°
to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
|
DIMENSIONS |
(W x
D x H) 202 x 68 x 111 cm (79.5 x 26.8 x 43.7 in.) |
|
SHIPPING WEIGHT |
98
kg (214 Lbs.) |
ACCESSORIES
INCLUDED |
2
standard knife blades
Standard blade holder
Fiber tip pen
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian,
Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter
settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
|
Summa S3-160 (64")
T Series™
$14,997 CAD
|
Specifications |
Summa S3 160 (T
Series) |
|
TYPE |
160
cm (64 in.) tangential-knife, friction feed |
|
SPEED |
Up
to 1000 mm/sec. (40 in./sec.) axial;
Up to 1414 mm/sec. (56 in./sec) diagonal |
|
ACCELERATION |
Up
to 4 g axial;
Up to 5.5 g diagonal |
|
KNIFE PRESSURE |
0-600 grams, in 5-gram increments |
ADDRESSABLE
RESOLUTION |
0.025 mm, 0.1 mm selectable (Metric);
0.001 in., 0.005 in. selectable (English) |
|
REPEATABILITY |
Vinyl =/< 76 cm (30"):
Within +/- 0.1 mm (0.004 in.) on plots up to 12 m (40
ft.) long;
Vinyl > 76 cm (30"):
Within +/- 0.1 mm (0.004 in.) on plots up to 4 m (13
ft.) long |
|
TOOL COMPATIBILITY |
Standard knife for vinyl, reflective and fluorescent
films;
Thick material knife for sandblast resist and other
films up to 1.2 mm (.047") thick;
Double-tip knife for heavy duty materials;
Ballpoint pen for plotting on paper;
Pounce tool for pouncing on paper |
|
MEDIA WIDTHS |
17
to 168 cm (6.7 to 66 in.) |
|
MEDIA LENGTH |
50 m
(164 ft.) maximum |
|
MEDIA THICKNESS |
Up
to 0.25 mm (0.01 in.) with standard knife;
Up to 1.2 mm (0.047 in.) with thick material knife
Up to 0.25 mm (0.01 in) reflective and other hard-to-cut
materials with double-tip knife |
|
CUTTING AREA |
158
cm x 50 m (62.2 in. x 164 ft.) maximum |
|
MEMORY |
16
MB |
|
INTERFACE |
Ethernet and USB |
|
DISPLAY LANGUAGES |
English; French; German; Dutch; Italian; Spanish; Polish |
|
CUTTER LANGUAGES |
Summa DM/PL, HP-GL or
HP-GL2 (with selectable origin ; HP7475 and HP
7580/7585) |
POWER
REQUIREMENTS |
100-240 Vac, 48-62 Hz, 85 VA maximum |
OPERATING
ENVIRONMENT |
15°
to 35° Celsius (59° to 95° Fahrenheit);
35 to 80% relative humidity (non-condensing) |
|
DIMENSIONS |
(W x
D x H) 225 x 68 x 111 cm (88.6 x 26.8 x 43.7 in.) |
|
SHIPPING WEIGHT |
114
kg (251 Lbs.) |
ACCESSORIES
INCLUDED |
2
standard knife blades and standard nose piece
1 thick material knife and thick material nose piece
Blade holder for standard, thick material, and
double-tip knife (requires matching nose piece)
Ballpoint pen with pen holder
Power cord
Serial interface cable (PC) and USB Cable (PC/Mac)
Quick start guide (English, French, German, Italian,
Spanish and Dutch)
User's manual and drivers on CD-ROM
Summa Cutter Control™ software (for controlling cutter
settings)
WinPlot™ (PC) and MacSign Cut (Mac) cutting programs
|
contact
us...
Accessories
(All Summa S Class Vinyl Cutter Models):
NEW 7X Faster
Processor
NEW Ethernet
Connection
NEW
USB Memory stick interface
NEW Colourful, more
User Friendly Menu and Setup
OPOS™ X contour-cutting alignment system
Stand with adjustable front and rear media baskets
Media supply rollers with media end flanges
Media cutoff system
Automatic interface selection
Selectable origin
Variable knife-tip offset (0-1 mm / 0-0.04")
8 user-definable configurations
Autoload feature
Adjustable pinch roller pressure
Dual protection strips (cut and pounce)
Overcut feature (for easier weeding)
Flex-cut feature (for cutting completely through the media)
OPTiCUT™ and TurboCut™ performance
enhancement modes (when operating in drag-blade mode)
Vector look-ahead
Curve and arc smoothing
Diagnostic routines
NEW Option: Extra Pinch
Wheels In-field Upgrade available
You absolutely can't beat Summa's
lean, mean cutting machine! If you need to cut
sandblast mask for granite or extra thick films, then you need
the Summa S3 Class T Series cutter with tangential cutting
head. And if you run a high production, professional shop; if
you want to increase your cash flow with efficiency and ease; if
you want a fast, dependable, trouble-free vinyl cutter that
tackles any job; if you want incredible, long tracking without
the hassle and waste of sprocket-feed; if you want to be able to
make innovative, out-in-front promises to your clients and keep
them, Summa S3 Class T Series is your cutter. It
will never let you down. Combine that with SignEquip's legendary,
unbeatable service - it's a win-win situation for you. What are
you waiting for? Contact SignEquip now.
Need more info? We're as close as your email or
telephone. Real people answer our phones, and we love to
help you.
We're with you every step of the way. For one-step service
call SignEquip; we'll answer your questions, and you can place
your order over the phone.
^top
Home
|
